7
PARTS
1. Comfort Handle
2. Low/High Button
3. Motor Body Housing
4. Detachable Blending Shaft
5. Blade guard
6. Stainless Steel Blending Blade
(not shown)
7. Mixing Beaker
ASSEMBLy
Align the motor body with the blending
shaft and slide the pieces together
until you hear and feel the pieces click
together. It may be helpful to press the
release button when assembling.
6
OPERATION
The specially designed blade is for mixing and stirring all kinds of foods,
including salad dressings, powdered drink products, and sauces. It is
ideal for combining dry ingredients, and can be used to emulsify
mayonnaise, too.
This blade mixes and stirs while adding only a minimum of air to your
mixture. A gentle up-and-down motion is all you need to make the most
flavourful, full-bodied liquid recipes. Be careful never to remove the
Cuisinart
®
Smart Stick
TM
Two Speed Hand Blender from the liquid while
in operation.
1. Insert the blending attachment into the motor body.
(See Assembly, page 6.)
2. Plug electrical cord into an electrical wall socket.
3. Place blending shaft into mixture that will be blended.
4. Press and hold the desired speed button. The hand blender will
continue to run as long as the switch is pressed in. To turn hand
blender OFF, release the desired speed button and the motor will
stop.
5. Do not hold the button ON for longer than 50 seconds at a time.
6. Unplug immediately after use.
CLEANINg
Always clean the Smart Stick
TM
motor body and blending shaft thoroughly
after using.
Remove the blending shaft from the motor body. Clean the motor body
only with a sponge or damp cloth. Do not use abrasive cleaners which
could scratch the surface. To clean the blending shaft, wash by hand in
hot water using mild detergent, or in dishwasher.
Never immerse the motor body in water.
When the appliance has malfunctioned or has been dropped or damaged
in any way or it is not operating properly, return the appliance to the
Cuisinart Repair Centre for examination, repair or mechanical
or electrical adjustment.
1.
2.
3.
4.
5.
6.
7.
