ASSEMBLY INSTRUCTIONS
15
STEP 13 ASSEMBLING THE REFLECTOR
WARNING:
While every precaution has been made in
the manufacture of this product, care must be taken
during assembly in case sharp edges are present.
•Loosely screw the side panels (15) together using
twelve bolts (AA) and nuts (BB), overlapping as
shown below.
•Attach the top panel (14) to the top of the assembled
side panels (15) using six bolts (AA) and nuts (BB),
and then fully tighten all bolts.
STEP 14 ATTACHING THE REFLECTOR TO THE
LANTERN
•Fit the reflector to the lantern using three bolts
(FF) and washers (EE).
BB
AA
AA
BB
15
14
15
EE
FF
