Cuisinart Baby BFM-1000C Series Скачать руководство пользователя страница 4

Страница: 4 / 11

NOTE:

We recommend that you don’t run the unit continuously in

CHOP for more than 1 minute at a time. For the best results, allow

for 20 to 30 seconds rest time between cycles.

BOTTLE WARMER
NOTE:

These instructions are to be used as a guide only. Please

note that there are many variables, such as size of the bottle and
starting temperature of the food which can affect the speed as well
as the final temperature at which this unit warms the bottle or jar.
Adjustments to the instructions below may be necessary.

Always test

the temperature of food before feeding baby.

1. Lift the cover of the unit and remove the measuring cup from the

steam/bottle warming chamber.

It is important to make sure

there is no water in chamber before bottle warming*.

* To empty the unit of excess water open the cover and remove the

measuring cup from the Steam/Bottle Warming chamber. Tilt the
unit onto its left side over the sink and any extra water will come out.

2. Use the bottle warming side of the measuring cup and fill it with

water to the marked position that coincides with the amount of
milk being warmed (see chart below). Pour the pre-measured
amount of water from the measuring cup directly into the steam/
bottle warming chamber.

3. When warming a narrow bottle the adapter ring should be used

(see adapter ring instructions below). Do not use the adapter ring

with glass bottles.

4. Let the bottle sit for 15 to 30 seconds before removing and be

extremely careful removing the bottle from the unit. Shake the bottle
to distribute the heated contents before checking the temperature.

5. Put the bottle into the Steam/Bottle Warming chamber and turn

the dial to STEAM and the LED light will illuminate. The unit and
the LED light will shut off automatically once bottle warming is
complete. Turn the dial to the OFF position.

ADAPTER RING

1. Put the bottle into the steam/bottle warming chamber.
2. Unsnap the adapter ring from the tabs located under the top

cover of the unit.

3. Place the adapter ring over the bottle.

Note: If the adapter ring does not fit loosely around the bottle,

do not use it.

Note: Do not use adapter ring with glass bottles.

4. Turn the dial to STEAM. The unit will shut off automatically once

bottle warming is complete. Turn the dial to the OFF position.

5. Let the bottle sit for 15 to 30 seconds before removing and be

extremely careful removing the bottle from the unit. Shake the

bottle to distribute the heated contents before checking temperature.

Always test the temperature of food before feeding baby.

the unit and lift up to open.

2. Using the handle, place the bowl on top of

the motor base. Carefully grasp the plastic

hub of the steam blade and insert into the

bowl. Press down firmly to lock.

3. Remove the measuring cup from the

steam/bottle warming chamber.

4. Fill the measuring cup with water to the

marked position that coincides with the

amount of food being steamed (see chart

on page 10).

5. Pour the water into the steam/bottle

warming chamber and place the

measuring cup back in the chamber.

NOTE:

Measuring cup must be replaced before

steaming for the unit to work properly

6. Add ingredient(s) (not shown) to be steamed

to the work bowl and place the bowl lid

on top of the bowl pushing, down to seal.

Align the lid handle with the bowl handle.

7. Lower the cover and press down firmly to lock.
8. Turn the dial to STEAM and the LED light

will illuminate to indicate the steaming has

begun. The unit and LED light will shut off

automatically once steaming is complete.

Turn the dial to the OFF position.

(Always test the temperature of food before

feeding to baby)

NOTE: Never open the cover during food

steaming.

NOTE

: It is normal for steam to come out of

the vents during operation.

CHOPPING/PURéEING FOOD

1. Once the steaming cycle is complete open

the cover and the lid to make sure the

food is tender enough to process. Make

sure to check the water content of your

food before chopping or puréeing. Any

leftover liquid can be used to increase

the nutritional content and/or achieve the

desired consistency.

Caution: Unit cover

and lid will be hot after steaming.

Be careful when opening.

2. Replace the lid and lower the cover.
3.  Press down firmly to lock the unit.
4.  Turn the dial to the CHOP function.
5.  Pulse several times to break up food and

then hold in that position for continuous

puréeing. Pulsing also allows more control

for desired consistency.

Removing Food from the Sides of the Bowl

Occasionally food will stick to the sides of

the bowl as you process. Stop the machine

to clear food away.

AFTER THE BLADE HAS

STOPPED MOVING,

remove the cover and

bowl lid and use the spatula to scrape the

food from the sides of the bowl back into the