CUE QMD3 Скачать руководство пользователя страница 15

Страница: 15 / 15

Slide the On/Off switch to the left to power on your unit, to the right to turn it off.

A blinking blue Bluetooth status LED will appear when your unit is powered on. This indicates that unit is ready for a Bluetooth

connection. It will be replaced with a double-blinking blue Bluetooth status LED when a Bluetooth connection is established.

Your unit unit will begin performing erratically if used with a low battery. Be sure to recharge your unit regularly before beginning a

practice session.

The USB charging port is used for charging your unit’s internal LIPO battery. Connect with a powered USB port using a standard USB

Micro-B cable for charging your unit.

The On/Off switch should be in the off position (slid left) when charging.

When plugged into

a USB port for charging the orange charging indicator LED will appear, it goes out when the charge is completed. Your unit will

operate for approximately two hours with a fully charged battery. The battery will recharge in about one hour. As with all

rechargeable batteries, operating time slowly degrades with age and usage.

Содержание QMD3















