Menu Position
Turn the rotary knob to the MENU position to perform various
housekeeping activities. Press A to advance to the next menu item,
or press B to activate the displayed menu action.
1)
Battery Level
– the battery level is displayed in the format
bt:99
, which is a percentage of remaining battery power.
Press the A button to advance to the next menu item.
2)
CLr
(Clear SD card) – This menu allows you to clear all
images and content on the SD card. Press and hold B to clear
the card. The
worm
will appear and the LEDs will flash RED.
When finished, the LCD will display the amount of space on
the SD card in MBs. Press A to advance to the next menu item.
3)
LEd
(IR LEDs) – This menu allows you to test Attack IR’s
IR LEDs and measure the battery strength. Press B to test
Attack IR’s infrared LEDs. The LEDs will be driven from
33% maximum power to 99% maximum power. The test
will stop when the batteries do not have sufficient power
to drive the LEDs or at 99%. If the batteries are depleted,
FAIL will be displayed. If the reading is below 99% you
may want to change the batteries to maximize the
illumination range.
4)
Pic
– This menu takes a test picture. Press B to take a picture.
Press A to advance to the next menu item.
5)
LOAd
– This menu allows you to install new firmware. We
may update the Attack IR firmware to improve its performance.
If a firmware update is required you will need to download a
firmware file from our website. Instructions will be provided
with the firmware. Please see www.cuddeback.com\support
for details. We recommend you check our website for updates
at the beginning of your scouting season.
6) Turn the rotary knob to a new setting or press A to return to
the battery level display.
7
USB Position
Attack IR can copy images from the SD card to a USB flash
drive. This allows you to quickly retrieve your images and take
them home with you.
Follow these steps to copy images from SD card to USB device:
1) Turn the rotary knob to the USB position.
USB
will be
displayed on the LCD.
2) Install a compatible USB flash drive (see appendix A).
3) Press A to display COPY.
4) Press B to begin the transfer of images from the SD card to
the USB device. The percentage of files copied will be
displayed during the copy process. Please wait while the
images are copied.
4) Once the copy process is complete all images on the SD card
will automatically be erased, and
done
will be displayed.
5) If you need to interrupt and cancel this operation, press and
HOLD B for 3 seconds. The operation will be cancelled and
the images on the SD card and USB device will remain.
Follow these steps to erase all content on the USB device:
1) Turn the rotary knob to the USB position.
USB
will be
displayed on the LCD.
2) Install a compatible USB flash drive (see appendix A).
3) Press A twice to display CLr.
4) Press and hold B to clear the USB device.
CAUTION
- Once the device is cleared it cannot be restored.
8
