Cuckoo CP-FR601SW Series, Руководство пользователя

Страница: 26 / 32

26
Please check before
asking for support.
▼ When the Water Purifier is not used properly, in compliance with the User Manual, the product may operate
abnormally even if it is not broken down. In such case, please take the following instructions accordingly. If you
cannot solve the problem, please contact Cuckoo website.
Problem Checklist
Recommendation
The water has an
unpleasant taste or
odor. • Have you not used the Water Purifier for a
long time?
• Is it time to replace the filter(s)?
• Have you not used hot water for a long
time?
• Drain the water from the hot/cold water tanks and
clean the cold water tank.
• Replace the filter (with a genuine filter of Cuckoo).
• Drain the water from the hot water tank through the
hot water drain tube from the back. Discharge hot
water through the hot water faucet frequently.
There is no water
coming out.
• Is the tap water connected properly?
• Is your household water pressure low?
•
Are you getting cold water but not hot
water?
•
Do you think there is a problem with the
hot/cold water lever?
• Open the tap water supply valve.
• Check if the feed tube is bent.
• Check if the water supply is cut off.
• Attaching External Pump (Optional) / Contact
Customer service.
• Push the hot water lever as you press the Child
Lock button.
• Check whether the hot water indicator is on.
• Check if the power is on.
※ If you still don't get any hot water after checking
the above, please contact our customer service.
• Contact Cuckoo website.
The hot water
temperature is too low. •
Is the hot water indicator on?
•
Did you already extract a lot of hot water?
• Is the temperature of purified water at room
temperature?
•
Turn the
“
Hot
”
button "ON" and make sure the
hot water indicator is on.
•
If you extracted all of the hot water from the hot
water tank, you need to wait 30 minutes to re-heat
the water.
• Turn the “ Hot ” button "OFF" and contact
Customer Service.