background image

 

Cubix Corporation 

 2800 Lockheed Way 

 Carson City, NV 89706-0719 

 Page 2 

Sales 800.829.0550 

 

http://www.cubix.com

 

 [email protected] 

 Xpander-desktop-elite-g3 20190201 

Slot 1 - 4 x16 transfer 
rate, theoretical 

PCIe Gen 3, 8.0Gbps x16 = 128.0Gbps 

LCD panel backlight 

Toggle on / off using right button

 

Rear panel 

Power input receptacle, PCIe cables and cooling fan 

Fan profile settings 

Use Xpander internal jumpers JP7 and JP8 (see page 8) 

Cooling fan profiles 

1 x fan runs at 112cfm (cubic feet per minute) maximum 

Performance 

2 x double-wide GPUs in slots 1 and 4, plus 1 

– 2 x single-slot PCIe cards 

Quiet 

1 x double-wide GPU in slot 1 or 4 x single-wide GPUs 

High Performance 

– 3 x double-wide GPUs, plus 1 – 2 x single-slot PCIe cards 

GPU 

4 x double-wide GPUs 

AC power supply 

 

Standard version 

Single-phase, auto-ranging, 100 - 240VAC, 15-7Amps, 50/60Hz; total 
output power is not to exceed 1,500Watts 

High-power option 

Single-phase, auto-ranging, 115 - 240VAC, 17-10Amps, 50/60Hz; total 
output power is not to exceed 1,600Watts 

Low-power option 

Single-phase, auto-ranging, 100 - 240VAC, 10-5Amps, 50/60Hz; total 
output power is not to exceed 1,200Watts 

Standard aux power 

4 sets of connectors, each with 8pins + 8pins 

Optional aux power 

4 sets of connectors, each with 8pins + 6pins 

Operating environment 

0° to 30° Celsius (32° to 86° Fahrenheit) temperature 
5% to 80% non-condensing humidity 

Dimensions (no handle) 

10.85" H x 8.50" W x 16.17" D (27.56cm H x 21.59cm W x 41.07cm D) 

Dimensions (with handle) 

12.60" H x 8.50" W x 16.17" D (32.00cm H x 21.59cm W x 41.07cm D) 

Weight 

23.00lbs (10.43kg) 

Warranty / period 

Parts & labor return to manufacturer / 2 years 

  Ext. warranty period 

Optional 3 years 

 
 

Included 

Desktop Elite HE standard version includes a 
cooling fan, a 1,500W power supply with 4 x 
8Pin + 8Pin (8P + 8P) auxiliary (aux) power 
cables and a power cord as well as Main 
Interface Board (MIB), one PCIe x16 HIC and 
one external PCIe x16 cable, 1meter long. 
Desktop Elite includes installation media 
because installation requires no driver or other 
software. The only drivers you install are those 
for the devices you install in the unit. Xpander 
includes a two-year warranty. 
 
 

Options 

The optional LE version features a 1,200W 
power supply with 4 x 8P + 6P aux power 
cables. The standard external PCIe cable length 
is 1meter. Optional 2m PCIe cable is also 
available. Cubix offers an optional third-year 
warranty on Xpander products. 
 
 
 
 

Содержание Xpander Desktop Elite











Отзывы: