40
4/8/16CH Triplex DVR
Digital Video Recorder
“Sensitive Highest”:
The highest sensitive level
5.3.2. Record Time
To set the motion
’s record time as 5sec, 10sec, 15sec, 20sec, 25sec,
30sec, 45sec, 60sec, 90sec, 120sec, 150sec or 180sec
5.3.3. Alarm Mode
“Mute”:
No beep whatever detecting.
“
Buzzer-Short
”:
Beep shortly by buzzer on main board when
detection is active
“
Buzzer-Long
”
: Beep long by buzzer on main board when detection
is active
“
Alarm-Short
”:
Beep shortly by speaker of system when detection is
active
“
Alarm-Long
”:
Beep long by speaker of system when detection is
active
5.3.4. Alarm Time
To Setup the time period of beep by
“Nonstop”(no stop), 5sec, 10sec,
15sec, 20sec, 25sec, 30sec, 35sec, 40sec, 45sec, 50sec, 55sec or 60sec
5.3.5. Trigger Full Screen
To display the trigger channel on full screen when it act as 1sec, 2sec
…
or 30sec.
“
OFF
”
: It will not display on full screen when the channel has been
triggered. Also, the trigger area will turn to
“red-color”
5.3.6. Trigger Type
There are two trigger types:
“Initial Trigger” and “Continuous Trigger” for
selection.
Initial Trigger:
When channel has been triggered, it will display on full
screen as the setting time period. In that time period, this channel will
ignore any other trigger.
Continuous Trigger:
When channel has been triggered, it will display on
full screen as the setting time period. In that time period, this channel is
still watching out. If another trigger act, the channel will display on full
screen and count all over again by the setting time period.
