20/42
d.
UPnP
This IP camera supports UPnP, If this service is enabled on your computer,
the camera will automatically be detected and a new icon will be added to
“My Network Places.”
Note: UPnP must be enabled on your computer.
Please follow the procedure to activate UPnP
1. open the Control Panel from the Start Menu
2. select Add/Remove Programs
3. Select Add/Remove Windows Components and open
Networking Services section
4. Click Details and select UPnP to setup the service
5. The IP device icon will be added to “MY Network Places”
6. User may double click the IP device icon to access IE browser
e.
RTSP Setting
Enable or disable RTSP server first and can setup RTSP port and
the start and end port of RTP
f.
Multicast Setting (Based on the RTSP Server)
There are two multicast streaming can be setup. Each streaming
can key in the IP Address, port and TTL.
g.
ONVIF
Содержание ON-HS94A
Страница 1: ...1 42 User Manual IP CAMERA ...
Страница 7: ...7 42 ...
Страница 12: ...12 42 1 2 3 4 5 ...
Страница 15: ...15 42 V Configuration Click to get into the administration page Click to go back to the live video page ...