Cube Controls Formula, Руководство пользователя

Страница: 11 / 16

11
Adjusting the trimmers
Carefully place a small philips screwdriver inside the screw hole leaved by
the screw you removed in the previous step, and move it slightly until it
engages the trimmer. It sits around 10mm below the surface of the main
body.
There is one trimmer for each right (up-shift) and left (down-shift) paddles.
Press the paddle you are adjusting and keep it pressed, rotate the trimmer
slowly clockwise or anticlockwise until the down-shift button (9) or up-shift
button (10) are on.
Please notice that the adjustment trimmer have end points on both
ends, do not force the rotation if you reach them.
Release the shifter, remove the screwdriver and check if the shifter is now
working properly. If needed, please, do repeat this process for the other
paddle.
Once you are done with the calibration, put back in place the Torx screws
you removed at the beginning.