Cub Cadet CC924HT, Руководство оператора, Страница: 13 / 16

-
13-
CLEANING
1.Brush off dust and grass cuttings from the unit and wipe up water and oil stain with dry cloth.
STORAGE
1. Keep the unit away from flames or sparks when it contains fuel.
2. Allow the unit to cool before storage.
3. Store the unit in a dry, well-ventilated and secure location or at an adequate height to prevent any
inadvertent use or damage. Keep out of the reach of children.
LONG-TERM STORAGE
1. Drain all the fuel out of the tank into a container with an identity symbol for 2-stroke engines. Do
not use fuel which has been stored for longer than 30 days.
2. Start the engine and leave running until it stops. This ensures that all the fuel has been drained out
of the carburetor and used up.
3. Stop the engine and allow it to cool down. Remove the spark plug and pour 30ml high quality
2-cycle engine oil into the cylinder. Gently pull the starter rope to disperse the oil. Set the plug
back.
WARNING
Before using the unit after the s torage period, remove the spark plug and pour out all the
engine oil from the cylinder.
4. Complete clean every part and carefully inspect for damaged or loose parts. Repair or replace the
damaged parts and, if necessary, tighten all loose screw, nuts and bolts. Apply anti-rust oil to the
metal parts such as throttle cable. The unit is now ready for storage.
5. Store the unit in a dry, well-ventilated and secure location or at an adequate height to prevent any
inadvertent use or damage. Keep out of the reach of children.
TRANSPORTATION
1. Before transporting the unit, allow it to cool down.
2. Empty the fuel tank before transit. Make sure the fuel cap is securely tightened.
3. It is better to take off the cutting attachments and protect them with a proper cover to avoid
unexpected damage.
4. Secure the unit with rope to prevent it from shifting during transportation. Do not try to
transport it by a bicycle or motorcycle.
CLEANING AND STORAGE