manualshive.com logo in svg

Cub Cadet CC924HT, Руководство оператора, Страница: 10 / 16

Поделиться
Скачать
Cub Cadet CC924HT Скачать руководство пользователя страница 10

-10-

CARBURETOR

1. Idling speed can be adjusted by idle 

    screw.

2. Adjusting the idle-speed screw clockwise

    will increase the idling speed and adjusting

    it counterclockwise will decrease the idling

    speed. You should use a tachometer 

    to measure the speed while adjusting.  

    Make sure the idling speed within the 

    recommended range 2700~3300 rpm.

3. Every unit had been run and tested at the

    factory to ensure that the carburetor works

    at its best condition. But after a period of

    use, if trimmer head or cutting blade

    continues to rotate at idling or the engine

    stops when you fully release the throttle

    trigger, make adjustment to idle screw.

 

WARNING

Improper adjustment may cause damage to 

the unit. If engine does not run well after

carburetor adjustment, please contact the 

authorized dealer where you bought the 

product.

 

 

Choke Lever

Idle screw

Carburetor

  

  

Run Position

     

Start Position

FUEL FILTER

1. Empty the fuel tank.Make sure there is no 

    reserved fuel.

2. Pull the fuel filter out of the tank with a hook 

    or wire and disconnect the filter from the fuel 

    hose.

3. Wash the filter with clean kerosene(or replace 

    the old filter if it is heavily fouled,and clean the 

    fuel tank),then put the filter back to the 

    hose,and put the fuel hose back to the fuel tank.

Fuel Filter

 

 

WARNING

Many solvents are highly flammable and may 

cause serious burns.Improper use of solvents 

can result in fire or an explosion.Do not use 

gasoline or low flash-point solvents to clean the 

fuel filter. Clean only in a well-ventilated area 

away from sources of sparks or flame, including 

any appliances with a pilot light.

AIR FILTER

CLean and lubricate air filter at every 25 hours of 

use. It is important to service these components 

properly.If the air filter is not cleaned and serviced, 

any warranty will be deemed null and void.
1. Disassemble the filter cover, and pull the filter 

    out of the air filter housing.

2. check the filter,replace a new one if necessary.

3.Wash the element in kerosene,put it in engine oil 

    and squeeze it by one hand.leave it to drip and 

    dry completely.

4.Assemble the filter,filter cover and use screw

    to tight the parts together.

Air Filter

Air Filter Cover

MAINTENANCE AND REPAIR

Содержание CC924HT

















Отзывы:

Нет отзывов