7
SECTION 2: LOOSE PARTS
The grass catcher kit is shipped with following loose parts in the carton. Please remove all loose parts from the carton before
discarding it. Compare with Figure 1 to check that no parts are missing or misplaced. Also identification of these loose parts at
this point will help in assembly.
Figure 1
Hardware Pack
NOTE:
For ease of assembly, group the items of the hardware pack according to Figure 2. These categories are referred to in
assembly instructions later in this manual. The hardware items are not drawn to scale here.
Figure 2
Bag Cover
Catcher Tube
Extension Tube
Boot Mount
Catcher Support
Upright Gusset (2)
Upright Mounting
Bracket (2)
Weight Bar Bracket
& Weight Bar
Grass Bag (3)
Bracket
Chute Elbow
Plate
shown for reference
Lock Pin (2)
NOTE:
These hardware
pieces will only be
included in the hardware
pack if the retainer hook
is shipped unassembled.
See page 10.
Group A
Group B
Group E
Group C
Group D
Retainer
Hex Bolt (9)
1/4-20 x
0.620”
Flange
Lock Nut (9)
Hex Bolt (2)
1/2-13 x 1.0”
Lock Nut (2)
Shoulder
Screw (2)
3/8-16
Belleville
Washer (2)
Flange
Lock Nut (2)
Hex Bolt (2)
3/8-16 x 6.25”
U Bolt (2)
Top Lock
Flange
Nut (6)
Carriage
Bolt (2)
3/8-16 x 1.0”
Carriage
Bolt
3/8-16 x 1.25”
Top Lock
Flange
Nut (5)
Hook (2)
Flat
Washer (2)
Bell
Washer (5)
Hex Bolt (2)
3/8-16 x 1.0”
