CTS HES-3109 Series, Руководство пользователя

Страница: 38 / 50

38
Switch(config-if-PORT-PORT)#
vlan dot1q-vlan mode trunk Set the selected ports to trunk mode (tagged).
Switch(config-if-PORT-PORT)#
vlan dot1q-vlan mode trunk
native Enable native VLAN for untagged traffic.
No command
Switch(config)# no vlan dot1q-
vlan [1-4094] [1-4094] Delete the specified VID.
Switch(config)# no vlan qinq-
vlan Disable Q-in-Q VLAN.
Switch(config)# no vlan qinq-
vlan isp-port Remove ISP port settings.
Switch(config)# no vlan qinq-
vlan stag-ethertype Remove the ether type for the service tag
settings.
Switch(config)# no vlan qinq-
vlan stag-priority Remove the priority bit for the service tag
settings.
Switch(config)# no vlan qinq-
vlan stag-vid Remove the VID for the service tag settings.
Switch(config-if-PORT-PORT)#
no vlan dot1q-vlan access-vlan Set the selected ports’ PVID to the default
setting.
Switch(config-if-PORT-PORT)#
no vlan dot1q-vlan mode Remove port mode.
Switch(config-if-PORT-PORT)#
no vlan dot1q-vlan mode trunk
native Disable native VLAN for untagged traffic.
Switch(config-if-PORT-PORT)#
no vlan dot1q-vlan trunk [1-
4094] [1-4094] Remove the selected ports’ VLAN membership.
The selected ports are no longer member ports
in the specified VLAN.
Show command
Switch(config)# show vlan dot1q-vlan
Show 802.1q VLAN table.
Switch(config)#show vlan interface Show each interface’s VLAN assignment and
tagging information.
Switch(config)#show vlan
interface [port_list] [port_list] Show the selected ports’ VLAN assignment and
tagging information.
VLAN dot1q & interface example
Switch(config)# vlan dot1q-vlan 100 Create a new VLAN 100.
Switch(config)# vlan management-vlan 1
management-port 1-3 Set port 1~3 to management ports.
Switch(config)# interface 1-3 Enter port 1 to port3’s interface mode.
Switch(config-if-1-3)# vlan dot1q-vlan trunk-
vlan 100 Assign the selected ports to VLAN 100.
Switch(config-if-1-3)# vlan dot1q-vlan mode
access Set the selected ports to access mode
(untagged).
Switch(config-if-1-3)# vlan dot1q-vlan access-
vlan 100 Set the selected ports’ PVID to 100.