CTS HES-3109 Series, Руководство пользователя

Страница: 28 / 50

28
Show command
Switch(config)# show qos Show or verify QoS configurations.
802.1p-map example
Switch(config)# qos 802.1p-
map 6-7 3 Map priority bit 6 and 7 to queue 4.
Switch(config)# no qos
802.1p-map 6-7 Delete or remove 802.1p priority bit 6 and 7’s mapping.
5. Use interface command to set up default class, a tag priority to the specific queue
and ingress & egress rate limit.
QoS & Interface command Parameter Description
Switch(config)# interface
[port_list] [port_list] Enter several port numbers separating by a
comma or a range of port numbers.
For example: 1,3 or 2-4
Switch(config-if-PORT-
PORT)# qos default-class [0-
3] [0-3] Specify the default class for the selected
interfaces.
Switch(config-if-PORT-
PORT)# qos rate-limit ingress
[8-1048568] kbps [8-
1048568]
kbps Specify the ingress rate between 8 and
1048568.
Switch(config-if-PORT-
PORT)# qos rate-limit egress
[8-1048568] kbps [8-
1048568]
kbps Specify the egress rate between 8 and
1048568.
Switch(config-if)# qos queue-
weighted [1:2:4:8] [1:2:4:8] Specify the queue weight of the selected
interfaces such as “1:1:1:1”, “1:2:4:8”,
“1:3:6:15”, “1:4:8:24” or “1:5:10:35”. The
allowable weight range for each queue is
from 1 to 127.
No command
Switch(config-if-PORT-PORT)# no qos
default-class Set QoS default class setting to the default.
Switch(config-if-PORT-PORT)# no qos rate-
limit ingress Set QoS ingress rate limit setting to the
default.
Switch(config-if-PORT-PORT)# no qos rate-
limit egress Set QoS ingress rate limit setting to the
default.
Switch(config-if)# no qos queue-weighted Set QoS queue weight values to the
defaults (1:2:4:8).
Show command
Switch(config)# show qos
interface [port_list] [port_list] Show or verify the selected interfaces’
ingress and egress rate configurations.
Switch(config)# show qos interface Show or verify each interface’s ingress and
egress rate configurations.