CTS HES-3106 Series, Руководство пользователя

Страница: 8 / 13

8
2. INSTALLATION
To properly install the Managed Switch, please follow the procedures listed
below. Procedures covered in this chapter are described below in separate
sections.

Installation Requirements

Unpacking the Managed Switch

Installing the Managed Switch

Powering on the Managed Switch

Connecting the Managed Switch to the Network
2.1 Installation Requirements
Basic requirements for installation are as follows:

Environmental conditions

One power outlet

Proper ventilation

Proper isolation to electrical noise, radio, etc..

UTP cables should not run in the same duct with power and
phone line cables

Required SFP Transceivers or UTP cables
2.2 Checking the Package Contents
Unpack the package carefully and check the package contents. The package
should contain the following items:

Items included in standard package:

1 Managed Switch

1 Documentation CD

1 Power Adaptor
If any of the above items is found missing or damaged, please contact your local
sales representative for support or replacement.