CTM SIGMA 1 BM, Руководство пользователя

Страница: 38 / 100

38
When
needed
After
every use
Weekly Monthly
Remove and wash the squeegee
X
Drain the recovery tank
X
Drain, rinse with clean water or sanifi-
cate the recovery tank
X
Charge the batteries
X X
Check the acid level in the battery cells
(if batteries are not maintenance-free)
X
Check the wear of the squeegee rubber
blades
X
Open and clean the suction filter
X
Remove brushes and check for brush wear,
foreign bodies and wrapped belts
X
Verify the machine general conditions.
X
Open and clean the solution water filter
X
Verify that suction hose and conduct
are free from obstructions
X
Check and clean the pivoting wheels
X
Check wear and function of traction drive
belt or chain; if necessary, adjust belt or
chain tension
X
Clean the brush plate, squeegee sup-
port and squeegee
X
Check the lifting/lowering of the brush
plate.
X
Check the lifting/lowering of the squee-
gee.
X
Grease the moving parts.
X
Check the control cable for the opening of
the solution water tap.
X
Descale water hoses.
X
8.9 RECOMMENDED SPARE PARTS
You’ll always be able to use your machine as effi-
ciently as possible by maintaining a stock of the
most common consumable materials and by sche-
duling routine and extraordinary maintenance. Con-
tact your dealer for a list of these spare parts.
9. OPERATING CHECKS
9.1 THE MACHINE DOESN’T WORK
The key isn’t inserted or correctly turned.
☺
Insert and turn the key to position “1”.
The battery connector is disconnected or poorly
attached to the main wiring connector.
☺
Firmly connect the two connectors.
The machine is charging.
☺
Complete the charging operation.
The batteries are dead.
☺
Charge the batteries.
9.2 THE BRUSHES DON’T ROTATE
The brush motor switch is not selected.
☺
Press the button to activate the brushes.
The brush motor thermal breaker tripped; the
motor overheated.
☺
Troubleshoot the cause (cords or similar items
that impede movement, surface too rough, etc.)
and press the reset breaker (the first from the top).
The transmission belt is broken.
☺
Replace it.
The motor relay or the brush motor is broken.
☺
Replace it.