User's Manual
HS-7200 Series
14
Circuit Breaker
When the electric circuit is overloading or malfunctioned the Circuit Breaker will automatically
shut off the main power of the chair to ensure safety in performance.
Pressing down the button (X) will regain mobility.
Release and take off screw (W), adjust backrest to your comfortable angle and target the
hole to fasten screw. (same for both side)
Backrest Tilting Adjustment
X
Y
Figure 20
Figure 20
Figure 21
Figure 21
W
W
Figure 19
Figure 19
Freewheel levers
For your convenience, C.T.M. HS-7200 is equipped with two free wheel levers.
These levers allow you to disengage the drive motors and maneuver the chair
manually.
1.In travelling, set the two metallic levers (Y) to the Drive position.
2.In stop or when the chair is malfunctioned and unable to be mobile, push the levers
(Y) to the Neutral position so the chair is movable by human force.
DO NOT use your chair while the drive motors are disengaged unless
you are in the presence of an attendant! DO NOT disengage the drive
motors when your chair is on an incline. The chair could roll down on
its own, causing injury!
To engage or disengage the free wheel feature:
1. Turn the free wheel levers outward or inward to engage the drive motors.
(See Fig. 26)
It is important to remember that when your HS-7200 is in freewheeling
mode, the braking system is disengaged
