User's Manual
HS-7200 Series
OPERATING YOUR REHAB CHAIR
11
1. By pressing tilting button (F)
2. Then pull joystick (H) backward to tilting, chair will be declining, to stop by releasing
the joystick (H).
3. By pushing joystick (H) forward, to inclining chair, will stop when back to the original
position.
Figure 6
Figure 6
Figure 7
Figure 7
Figure 8
Figure 8
Figure 9
Figure 9
Electrical Tilting Function (HS-7200T Only)
1. By pressing elevating button (G)
2. Then pull joystick (H) backward to adjust to your
desired height.
3. By pushing joystick (H) forward to receding to original
position.
Electrical Elevating Function (HS-7200B Only)
By pushing or pulling the controller (I) to desired position.
*When controller adjusted back to normal position,
make sure T shape pin is inside the square tube's
hole.
*Do not driving while operate above
function.
*Watch out for pinch warning.
Controller Position Adjustment
1. By pressing reclining button (F)
2. Then pull joystick (H) backward to reclining to any
angles.
3. By pushing joystick (H) forward to inclining chair
back to its original position.
Electrical Reclining 180 Degree Function (HS-7200B Only)
I
Figure 5
Figure 5
H
F
C
E
B
A
D
G
