CTM A13R, Руководство пользователя

Страница: 44 / 176

44
CONDITIONS OF WARRANTY
All our appliances are subjected to rigorous tests and are covered
by warranty against material or manufacturing defects for a pe-
riod of 12 months. The warranty comes into effect from the date of
purchase. The date of purchase is the date indicated on the receipt
issued by the Reseller when the appliance is consigned. The manu-
facturer shall repair or replace any faulty parts free of charge during
the period covered by the warranty. Any defects, which cannot be
clearly attributed to material or manufacturing defects shall be ex-
amined by one of our Technical Service Centres or at our factory and
charged in accordance with the outcome. The following are anyhow
not covered by the warranty: accidental damage during transpor-
tation or handling, accidental damage caused by negligence or
unsuitable conduct, damage due to incorrect or improper uses or
installations which do not conform with the warnings included in
the instruction manual, and anyhow due to unusual events which
do not depend on the running or use of the appliance. Appliances
requiring repair must be delivered at the Technical Service Centre
complete with all their original accessories together with proof of
purchase. If the appliance has been repaired or tampered with by
unauthorised third parties, the warranty shall be considered null
and void. The warranty shall also be considered null and void if
the user is not able to produce an original (legible and complete)
document proving purchase or if it not possible to read the appli-
ance serial number located on the frame. The appliance shall not be
replaced and the warranty shall not be extended once the appliance
has been affected by a fault. Repairs shall be carried out at one of our
Authorised technical Service Centres or at our factory. Appliances
for repair must be sent carriage free, that is, the user shall pay and
be responsible for carriage. The warranty does not cover the clean-
ing of working parts, any scheduled maintenance nor the repair or
replacement of parts subject to normal wear and tear. The manufac-
turer shall not be held liable for damage to persons or things caused
by any installation which does not comply with the instructions in
the manual or faulty use of the appliance.
DISPOSAL (WEEE)
As the owner of electrical or electronic equipment, the
law (in accordance with the EU Directive 2002/96/EC of
27 January 2003 on waste from electrical and electronic
equipment and the national laws of the EU Member States
that have implemented this Directive) prohibits you from disposing
of this product or its electrical / electronic accessories as municipal
solid waste and obliges you to make use of the appropriate waste
collection facilities.
The product can be disposed of by returning it to the distribu-
tor when a new product is purchased. The new product must be
equivalent to that being disposed of. Disposing of the product in
the environment can cause great harm to the environment itself and
human health. The symbol in the figure indicates the urban waste
containers and it is strictly prohibited to dispose of the equipment in
these containers. Non-compliance with the regulations stipulated in
the Directive 2002/96/EC and the decrees implemented in the vari-
ous EU Member States is administratively punishable.
conduits.
9.2.7 THE BRUSH MOTOR OR THE SUC-
TION MOTOR DOESN’T STOP

The relay switch is defective.

Stop the machine, cutting off the main power
supply and disconnecting the main battery connec-
tor, and contact the technical service centre.
9.2.8 THE SQUEEGEE DOESN’T CLEAN OR
DRY EFFICIENTLY

The squeegee blades are worn or are dragging
solid dirt.

Replace or clean them.

The squeegee adjustment is not correct; the
advancement must be exactly perpendicular to the
running direction.

Adjust the squeegee.

The suction hose, the squeegee conduit or the
inspection compartment is clogged.

Clean out and remove any obstructions from the
conduits.
9.2.9 THE BATTERY CHARGER DOESN’T
WORK

The battery charge doesn’t start.

Check that the battery charger is connected to
the battery. Consult the battery charger manual.
9.2.10 THE BATTERIES DO NOT CHARGE
OR DO NOT HOLD A CHARGE

At the end of the charging process, the battery is
not correctly charged (see the battery manufactu-
rer’s instruction-maintenance manual)

Check the battery charger error message and
check the data indicated on the display (see the
battery charger’s instruction manual).

The batteries are new and do not generate 100%
of the rated performances.

The accumulator reaches the maximum perfor-
mance after 20-30 complete charge cycles.

The electrolyte has evaporated and does not
completely cover the plates.

Check the battery manufacturer’s use and main-
tenance manual.

There are significant differences in density among
the various elements.

Replace the damaged battery.
Always consult the battery and battery charger use
and maintenance manual. If this does not solve the
problem, contact the authorised technical service
centre.
The manufacturer CANNOT solve problems
caused by using batteries and battery char-
gers that were not directly supplied.