10
Installation is not complete until the radio connection has been
checked by pressing the function button on the Sensor and noting
that the red diode on the relay responds with a flash and that the
Sensor acknowledges this with a sound signal and red flash.
R-T 25A
Pr
og.
N
N
L
L
IN
LOAD/CONTACTOR*
*Can also control a contactor. This is recommended when
the RC circuit is mounted in parallel with the coil on
the contactor.
Installation information
Deletion of connected units on Socket
Hold the programming button in for 8 s until the Red diode begins
to light up. Do not release the button until this diode starts to flash.
All connected units are now deleted.
