background image

5

Everyday use

EMERGENCY MODE  

In the event of problems with the cooker guard which you are unable to resolve, 
you may activate the emergency mode, which will allow power to the cooker 
for 12 hours (can be repeated for a further 12 hours). 

NB: All safety functions are deactivated in this period. Use the time to contact an 
electrician who will be able to resolve the problem.

To activate the emergency mode: 
Turn the cooker fuse off and on three times at intervals of at least  
1 second for a period of 10 seconds.

Alarmsignal

Alarm signal:

One (1) light and sound signal 

every 15 seconds for 

5 minutes.

Cause:

Cooker Guard warning that timer is in last 5 minutes.

Action:

Press control button to restart timer.

Alarm signal:

Five (5) light and sound signals 

in the course of 

5 seconds.

Cause:

Anti-tamper function detects that sensor has been 
removed from bracket.

Action:

Replace sensor in bracket and press control button.

Alarm signal:

Two (2) light and sound signals 

every 5 minutes.

Cause:

Battery change necessary.

Action:

Change batteries. NB: Make sure you have new 
batteries to hand first (3 x AA).

Alarm signal:

Three (3) light and sound signals 

every 5 seconds 

and a steady red light between signals.

Cause:

Overheating.

Action:

Reduce temperature, or press control button 
to temporarily approve high temperature.

Alarm signal:

Two (2) light and sound signals 

and the cooker shuts 

off 10 min after use.

Cause:

Battery change necessary.

Action:

Change batteries. NB: Make sure you have new 
batteries to hand first (3 x AA).

Alarm signal:

Three (3) light and sound signals 

every 30 seconds.

Cause:

Excess temperature continuing after shut-off.

Action:

Reduce temperature, or press control button.

4

Everyday use

Things to think about when 
cooking

Sliding a pan across to another 
ring will expose a very hot sur-
face, and the Cooker Guard may 
register this as overheating, 
causing the alarm to go off.

Use pans that cover the whole 
ring to reduce the chance of unwanted temperature alarms.

Temporarily extended cooking time 

(Only applies if Timer Function is activated, see page 3)

The timer (countdown clock) can temporarily be extended to 2 hours (12 hours if 
120/360 min. is set) by holding the control button in for 10 seconds.

The sensor beeps twice to confirm that the cooking time has been extended.
When the time expires or the cooker has been turned off for at least
2 minutes, the countdown is reset to the standard time.

To cancel the extended cooking time, hold the control button in for 10 seconds. 
The sensor beeps once to confirm.

Light

Control button

•  Reset alarm
•  Extend cooking time
•  Reset cut-out

Temperature sensor

Clean regularly with a damp 
cloth and soapy water.

Battery

We recommend changing the battery every 5 years or if there is a low battery 
warning.

1. 

Take the sensor off the wall.

2. 

Remove the back cover (2 screws) and change the batteries, 3 x “AA”. 

3. 

Reattach the cover and replace the sensor on the wall.

4. 

Press the control button.

Содержание 6251650













Отзывы: