MOUNTING THE RANGE HOOD
Note 1 : On stainless steel hoods, carefully remove the plastic protective film from all exterior surfaces
of the hood and chimney prior to final installation.
Note 2: At least two people will be required to mount the hood.
Hood Preparation
1.
Remove the filters
2.
Remove the rear or top duct knock-out
3.
Install the duct connector/damper
4.
Install the under cabinet range hood on kitchen cabinet
5.
Turn power back on
6.
Test the function of the unit speed and lights
7.
Re-install the filters
Note: If using the range hood in a re-circulating mode,you are not to remove any duct knock-out
INSTALLATION
Note: Measure the distance between stove top and the bottom of range hood,25’’ to 30’’ is
recommended.
1 Mark the screw holes in the bottom of kitchen cabinet as per position of screw holes at the top of
hood
2 Install the screws in the bottom of kitchen cabinet
3 Hook hood onto to screws in the kitchen cabinet
4 Balance the hood body by slightly adjusting the hood mounting screws
5 Tighten all screws until secure
Venting Methods
You can have two ways: Vertical Venting and Horizontal Venting (See below drawing)
