INSTALLATION GUIDE
SAFELY INSTRUCTIONS :
This fine product that you have just purchased is constructed from the highest quality
materials and workmanship.
Before installation and operation, we recommend the following procedures:
A
CHECK WITH YOUR LOCAL ELECTRICAL AUTHORITY TO ENSURE YOU COMPLY WITH LOCAL
ELECTRICAL REGULATIONS. THESE ELECTRICAL CODES HAVE BEEN DESIGNED FOR YOUR SAFTY.
BE SURE TO COMPLY WITH THESE CODES.
B
WE RECOMMEND THAT A SEPARATE AND DEDICATED CIRCUIT BE PROVIDED FROM YOUR HOME
ELETRICAL DISTRIBUTION PANEL. IT SHOULD BE PROPERLY PROTECTED WITH EITHER A FUSE OR A
CIRCUIT BREAKER.
A GROUND FAULT CIRCUIT INTERRUPTER (GFCI) IS MADATORY
. CONSULT A
LICENSED ELECTRICIAN FOR ALL WIRING.
C
THE GROUND TERMINAL ON THE THREE PRONG PLUG SHOULD NEVER BE REMOVED. THEY ARE
SUPPLIED AND DESIGNED FOR YOUR PROTECTION.
D
NEVRE MAKE ADJUSTMENTS TO ANY ELECRRICAL APPLIANCE OR PRODUCT WITH THE POWER
CONNECTED. BE SURE TO UNSCREW THE FUSE OR TRIP THE BBREAKER TO THE OFF POSITION AND
REMOVE THE POWER PLUG FROM THE RECEPTACLE BEFORE PROCEEDING
The necessary tools for the installation are:
-
One (1) electric reciprocal saw or one de 6¼’’ (160 mm) hole saw
-
One (1) electric drill with a 1¼’’ (32 mm) diameter drill bit
-
One (1) Robertson or Philip screwdriver
-
White (1) weather sea caulking for around the outside vent
Preparation
