CGC100 MANUAL
CTEK E-Mobility
www.ctekemobility.com
Page
4 (8)
1 General information
The CHARGESTORM® Connected Grid
Central (CGC100) is a load monitor for electric
vehicle charging stations. It can also monitor
other loads at the property during load
balancing. The CGC100 can act as an internet
gateway to Charge Portal, CHARGESTORM®
Connected cloud-based charging portal.
The CGC100 can manage up to 100 loading
outlets.
The CGC100 communicates with charging
stations using an Ethernet connection.
1.1
Purpose
This document explains how to perform
installation and commissioning and how the
product works.
1.2
References
ID Document
1) Configuration manual CCU, PD_CM_003
2) CHARGESTORM® Connected User
Manual, Pd_UM_00050.5
3) CCU NanoGrid Configuration Manual,
Pd_CM_004
2 Before installation
2.1
Tools
Recommended tools for installation.
•
Screwdriver
•
Stripping pliers
•
Spirit level
•
Drill
•
Mini USB cable
2.2
Material/ equipment
The following materials are also needed to
install the CGC100.
•
CHARGESTORM® Connected or the
CSR100 to be load balanced by the
CGC100 load monitor
•
Ethernet switch
•
Ethernet cables
•
Screw joints for cable feeds
•
Screw for wall mounting
2.3
Details
CGC100 contains the following components:
•
Energy meter Carlo Gavazzi, model
EM21, with current transformers
•
Control board, CCU
•
Power supply CCU
•
Fuse 10A
•
Terminal block for 230VAC
•
Triangular key for door.
All the components are mounted on your DIN
rail.
2.4
Dimensions
The CGC100 has the following external
dimensions in mm.
Model
Height
Width
Depth
CGC100
280
mm
600 mm
450 mm
Note: it is important to check that the enclosure
door can be opened at the installation site.
2.5
Installation site
Note the following:
•
Run the incoming cables (electrical,
Ethernet, transformer cables) through