CTD N80X, Инструкция по эксплуатации и руководство по техническому обслуживанию

Страница: 17 / 26

-17-
N80X and N90X Spindle Assembly Parts
1. 90M01L N80X or N90X Spindle, Left
90M01R N80X or N90X Spindle, Right
2. 8M03 N80X Flange
90M03 N90X Flange
3. 8M02 N80X Slinger
90M02 N90X Slinger
4. 9B2P04X Double Row Bearing
5. 9B2P06 Snap Ring
6. 2B4P27 Spindle Pulley 3”, .787 bore
7. 2BM23 Pulley Key
8. 9B2P05 Belleville Springs (4 required)
9. 151P16L Jam Nut, Left
151P16R Jam Nut, Right
10. 9B2P03 Bearing, Jam Nut side
11. 8B4P38 3VX450 N80X Drive Belt Banded
(2 required)
9B4P35 3VX375 N90X Drive Belt (4 required)
( for 3 H.P. motors)
9B4P36 3VX400 N90X Drive Belt (4 required)
( for 5 H.P. motors)
12. 9A05 Spindle Housing
13. 9B1P44L Spindle Nut, Left
9B1P44R Spindle Nut, Right
General Maintenance Check List:
Always disconnect electrical power and air supply.
1. Keep machine clean—especially around the moving parts of the machine.
2. Blow off and clean;
A. Around air cylinder.
B. Linear rods and bearings.
C. Spindle Housing
3. Check Air Filter Bowl for water and condensation build up.
4. Remove any scrap pieces and dust build up from inside floor stand cabinet.
5. Check monthly:
A. For excessive belt wear.
B. Make sure motor pulley set screws are tight.
Repair and Service:
Always use CTD factory authorized replacement parts and consult factory before making any repairs or
adjustments which may be unclear.