8
High speed coin counting operation instructions
The default batch quantities can be changed as
following steps:
· Press both B key and M key, then turn on the
power, the machine will enter into the “batch
changing mode” and the display show “bAt-
SEt”;
·Press B key to select the default memorized
default batch quantities which you want
to change;
·Change the selected default batch quantities
by pressing any numeric key; Save the amended
default batch quantities in the memory
by pressing M key, the previous default
batch quantities will be replaced;
·Turn off the power and turn on again, check if the default batch quantities have been
changed correctly.
Reject small coins mixed
Before putting the coins into the Hopper, please remove all paper scraps, lint, rubber bands,
etc., which may be mixed with the coins. Foreign objects may cause jamming or faulty
counting.
§
Set the Coin Diameter Adjusting Knob
and the Coin Thickness Adjusting Knob
according to the size of the coins to be
counted.
§
If a few small coins are
mixed with the coins,
install the Coin Reject Box onto the side of the
machine.