11
High speed coin counting operation instructions
Centrifugal Disc Jamming:
If foreign objects are mixed with coin in the Hopper, jamming may occur between the
Centrifugal Disc and the Coin Guide Plate.
§
Open the Side Cover.
§
Then, pull up the Front Feed Pulley Arm and
push & pull the Lock Plate upward to remove
the foreign objects.
The LED display “JA”:
If the counting sensor is covered by dust, the LED
will display “JA”, please remove the V-Belt, clean
the counting sensor using a cotton stick with
denatured alcohol.
Daily Maintenance
·
Be sure to turn the main power off before
attempting daily maintenance.
·
Clean the coin runway and the counting sensor
at least once a day with a brush.
·
Check whether the feed belt is dirty or worn.
If it is dirty, clean it using a piece of soft cloth
saturated with denatured alcohol. If it is worn,
replace it with a new belt.
·
If the machine requires service or additional
repair parts, please contact your local distributor.