VDSL2 Router
User Manual, Ver. 1.0
Page:18
MIB Parameters:
This section is to setup other VDSL2 parameters for both Upstream and
Downstream.
Target SNR:
Default value: 6dB
Range: 6dB to 24dB
This option is to set up the target SNR value, which means the SNR value
of the connection will be equal to higher than the target SNR value. If the
SNR value is lower than the target SNR value, then, the VDSL2 router will
try to lower the data rate and maintain the SNR value.
Maximum Rate Limit:
Default value: 101Mb/s
Range: 1Mb/s ~ 101Mb/s
This field is to setup the maximum data rate of upstream/downstream.
INP Symbol (30a):
Default value: 3-symbol
Range: no-protection, 1-symbol ~ 16-symbol
This option is to setup INP level for VDSL2 30a Profile.
INP Symbol (non-30a):
Default value: 2-symbol
Range: no-protection, 1-symbol ~ 16-symbol
This function is for setting up INP level for other VDSL2 Profiles, except
30a.
Maximum Interleave Delay:
Default value: 8ms
Range: no limit, no delay, 1ms ~ 63ms
The
value
is
to
setup
the
maximum
interleave
delay
of
upstream/downstream.
Rate Adaptation Mode
Default value: DynamicRa
Options: Manual, RaInit, and DyanmicRa
This mode is to decide the rate adaptation mode.
Mode
Description
Manual
No rate-adaptation. The initialization process
attempts to synchronize to a specified rate.
RaInit
Rate-adaptation during initialization process
only. The mode will attempts to synchronize to
a rate between minimum and maximum
Содержание VDTU2R140
Страница 1: ...VDSL2 Router with 4 Port Ethernet ...
Страница 53: ...VDSL2 Router User Manual Ver 1 0 Page 52 Default Ping Traceroute ...
Страница 56: ......
Страница 57: ......
