30
2.
100M/Full
3.
100M/Half
4.
10M/Full
5.
10M/Half
6.
Disable
3
3
.
.
5
5
.
.
3
3
R
R
I
I
P
P
/
/
O
O
S
S
P
P
F
F
RIP
The RIP (Routing Information Protocol) is a dynamic routing protocol used in local and wide area networks. It’s a very
simple protocol, based on distance-vector routing algorithms. As such it is classified as an IGP (interior gateway
protocol). VPN Router supports version 1 (RFC1058) and Version 2 (RFC2453).
It can set the specified interface (LAN, WAN1 to WAN8) to “passive mode”. On passive mode interface, all receiving
packets are processed as normal and rip does not send either multicast or unicast RIP packets.
OSPF
OSPF is an interior gateway protocol (IGP) for routing Internet Protocol (IP) packets solely within a single routing
domain, such as an autonomous system . It gathers link state information from available routers and constructs a
topology map of the network. The topology is presented as a routing table to the Internet Layer which routes
datagrams based solely on the destination IP address found in IP packets. OSPF supports Internet Protocol Version 4
(IPv4) and Internet Protocol Version 6 (IPv6) networks and features variable-length subnet masking ( VLSM) and
Classless Inter-Domain Routing (CIDR) addressing models.
OSPF detects changes in the topology, such as link failures, and converges on a new loop-free routing structure within
Содержание VDTU2-R240W
Страница 1: ...1 VDTU2 R240W VDSL2 802 11 WIRELESS ROUTER ...
Страница 6: ...5 3 10 2 ConfigTool 53 3 10 3 Ping 54 3 10 4 TraceRoute 55 3 10 5 Reboot 55 4 TERMINOLOGY 56 ...
Страница 58: ...57 This page is intentionally left blank ...
Страница 59: ......