MNX10023 / Rev C
4-11-08
9
After wiring terminal blocks, re-insert them into the SC200 unit.
Replace the main panel, use care when replacing the panel to prevent
damage to the internal wiring harnesses.
Warranty
If any PRO product should ever fail, we will repair or replace it at no charge, as
long as the product was not subjected to misuse, natural disasters, improper
installation or modification which caused the defect.
CONTACT INFORMATION:
Connection Technology Center, Inc (CTC)
7939 Rae Blvd.
Victor, NY 14564
1-800-999-5290 (US & Canada) 1-585-924-5900 (International)
[email protected] – www.ctconline.com
The block should have the Numbers
1-4on it. (shown right)
For the Dynamic output, connect the wires
to Terminals 3 & 4:
•
Terminal 3 – Positive output
•
Terminal 4 – Negative output
Figure 8. Block Connections
Figure 7. continued
