S E C T I O N 2 : I N S T A L L A T I O N
M N X 1 0 0 0 1 , R E V C
●
2 / 8 / 2 0 1 2
6
Connection Technology Center, Inc.
●
7939 Rae Boulevard
●
Victor, NY 14564
●
(585) 924-5900
Description
The conditioner is housed in a plastic enclosure suitable for 35mm-din
rail/surface mounting (
Figure 2
). On the front of the conditioner are electrical
connectors (WAGO 237 series positive force terminal blocks) for the ± 24 VDC
input and ± analog output, in addition to a transducer output BNC connector,
and electrical connectors (WAGO 237 series positive force terminal blocks) for
the ± signal output and ± sensor input. There is also a green indicator light
(Sensor OK) which illuminates when the transducer is properly connected to the
conditioner and working correctly. A user adjustable ZERO adjustment is
located on the front panel for calibration, if required.
The conditioner contains an input conditioning circuit, a gain circuit to
normalize the input to 2 V full scale, a high-pass and low-pass filter, a true RMS-
to-DC converter, and a 4-20 mA generator. A buffered output connection allows
the user to connect across the vibration sensor for on line vibration analysis
and testing of the sensor.
