MNX10033 REV 0
Effective: 3/03/09
5
Once the dip switch is set and the sensors are attached correctly to the inputs,
the unit is ready for use. Access the signal from the sensors through the
appropriate BNC’s.
General
There are no customer replaceable parts. The device has been designed to self
calibrate and monitor its own operational status. It should provide trouble-free
continuous service under normal operating conditions.
Warranty
If any CTC vibration analysis hardware product should ever fail, we will repair or
replace it at no charge.
CONTACT INFORMATION:
Connection Technology Center, Inc (CTC)
7939 Rae Blvd.
Victor, NY 14564
1-800-999-5290 (US & Canada) 1-585-924-5900 (International)
[email protected] – www.ctconline.com
Section III
Operation
Section IV
Maintenance
