MNX10033 REV 0
Effective: 3/03/09
2
Introduction
This document will explain the operation, setup, installation and maintenance of
the MMX-MOD3 modules, for use with vibration sensors. This module will take
the input from up to three separate single axis, 2 wire sensors, one dual output
sensor (vibration/temperature or 4-20mA/vibration) where the common is shared
between the dual output sensor input, or one triaxial output sensor, where the
“common” is shared between all sensors.
Description
The MMX-MOD3 module is a DIN rail mountable component with a small foot
print to accommodate limited spaces, and has been designed to allow flexibility in
adding a common collection point for vibration sensors. The modules are
traditionally mounted inside a protective enclosure.
Section I
Overview
