CTC Union IPCAM-8309FW, Руководство пользователя

Страница: 62 / 72

63
Authentication
：
Select the authentication method required when you send
an email.
Off: Select if no authentication is necessary when an email is sent.
On: When authentication is necessary to send an e-mail, select one of the
authentication methods from the following.
SMTP: Select if SMTP authentication is necessary when an e-mail is sent.
POP before SMTP: Select if POP before SMTP authentication is necessary
when an e-mail is sent.
Note
：
• When you set to On , be sure to select either or both SMTP or/and POP
before SMTP .
POP server name
：
This is necessary when the POP before SMTP is
selected in Authentication . Type the POP (receiving mail) server name, up
to 64 characters, or type the IP address of the POP server. This setting is
necessary when the SMTP server which sends e-mails performs
authentication using the POP user account.
User name, Password
：
Type the user name and Password of the user who
has the mail account. This setting is necessary when the SMTP server
which sends e-mails performs authentication.
Recipient e-mail address
：
Type the recipient e-Mail address, up to 64
characters. You can specify up to three recipient E-mail addresses.
Administrator e-mail address
：
Type the Administrator e-Mail address, up
to 64 characters. This address is used for reply mail and sending system
messages from the SMTP server.
Attached File Type: Select to attach the file as JPEG or MPEG-4.
Subject
：
Type the subject/title of the e-Mail, up to 64 characters. With
respect to mail which is sent according to the alarm detection when Alarm
sending of the alarm tab is set to On , the characters standing for the
sensor type are added to the subject.
Message
：
Type the text of the E-mail, up to 384 characters. (A line break is
equivalent to 2 characters.)