CTC Union IPCAM-8309FW, Руководство пользователя

Страница: 57 / 72

6.4.
Advanced Settings
6.4.1.
FTP Client
Use this setup page to configure capturing and sending of images to an FTP
server. By using FTP client function, you can send a video file which has been
shot and recorded triggered by the external sensor input, alarm buffer or with the
built-in motion detection function to FTP server. FTP client setting menu is
composed of three tabs, General , Alarm sending and Periodical sending .
6.4.1.1. General
FTP client function
：
To activate the FTP client function, select On . The
FTP client setting page appears. When you do not wish to use the FTP
client function, select Off .
Note
：
The frame rate and operability on the main viewer may decrease
while a file is being transmitted by the FTP client function.
FTP server name
：
Type the FTP server name to upload still images up to
64 characters, or the IP address of the FTP server.
User name
：
Type the user name for the FTP server.
Password
：
Type the password for the FTP server.
Retype password
：
To confirm the password, type the same characters as
you typed in the Password box.
Passive mode
：
Set whether you use the passive or active mode of FTP
when connecting to FTP server. Select On to connect to FTP server using
the passive mode.
58