CTC Union GSW-3420FM, Руководство пользователя

Страница: 19 / 145

Left part of the homepage is a function list. Users can select one of them for
status monitoring or switch configuration.
There are four operation groups in the function list.
1.
Configuration : this is for switch function configuration.
2. Monitor : this is for switch function status and statistics monitor.
3. Diagnostics : this is diagnostics functions for switch.
4. Maintenance : this is for switch maintenance, like firmware upgrade,
configuration backup/restore, system reset, ...
Middle part of homepage is the main operation area for each function.
This is Logout. Click it to logout.
This is Help. Click it to get help information for operation.
The details about management with http connection will be shown in the
following sub-sections.
6.2.2 Telnet and SNMP Interface Connection
<< Telnet Management Interface >>
If you want to use Telnet to manage the switch from remote site, you have to set
the IP/NetMask/Gateway address to the switch first. (Refer to Section 6.2.1.)
Then use "telnet <IP>" command to connect to the switch. Its operation
16