CTC Union GSW-3420FM, Руководство пользователя

Страница: 14 / 145

6. Management Connection
6.1 Console Interface and Command Line Brief
6.1.1 Console Interface Connection
<< Enter Console Interface >>
Please follow the steps to complete the console hardware connection first.
1. Connect from console port of the switch to COM port of PC with the console
cable.
2. Start the terminal program of Windows. Create a new connection and select
COM port of PC used for the console. Set the configuration of the terminal
as
[115200,8,N,1] . (You can find the terminal program in [Start] ->
[Programs] -> [Accessory Programs] -> [Communication] -> [Terminal]. If
you cannot find it, please install it from your Windows Installation Disk.
Please refer to your Windows user manual for the installation.)
3. Power on the switch.
If everything is correct, the booting screen will appear in the terminal program
when the switch is powered on. It will stop at the following screen after some
initializing messages.
-------------------------------------------------------------------------------------------------------
+M25PXX : Init device with JEDEC ID 0xC22018.
Jaguar-1 board detected (VSC7460 Rev. B).
................................................................................
................................................................................
RedBoot> fis load -d managed
Image loaded from 0x80040000-0x809903e4
RedBoot> go
press ENTER to get started
-------------------------------------------------------------------------------------------------------
Press <ENTER>, and Username and Password will be asked. “ admin ” /
“ admin ” is the default Username and Password for the switch.
6.1.2 Command Line Brief
<< Previlege Levels for Users >>
There are fifteen previlege levels for users of the switch. Use “ username ”
command in system configure mode under prompt “(config)#” to create users.
The system default user is “admin” with password “admin” and previlege level
15.
[ user previlege level ]
The default user name and password is " admin " / ” admin ” with previlege level
15. And users with different previlege level could be created with “username”
11