CTC Union GSW-3208M2 Скачать руководство пользователя | Manualshive

Страница: 89 / 145

background image

89

Chapter 4

Web Configuration & Operation

Groups:

Group ID

Port Members:

Ports that belong to this group.

4.10.4 MVR SFM Information

VLAN ID:

VLAN ID of the group.

Group:

The group address.

Port:

Switch port number.

Mode:

Indicate the filtering mode maintained per (VLAN ID, port number, Group Address) basis. It can be either Include

or Exclude.

Source Address:

The source IP Address. Currently, the system limits the total number of source IP addresses for filtering

to be 128. When there is no source filtering address, "None" is shown in the Source Address field.

Type:

Indicate the Type. It can be either Allow or Deny.

Hardware Filter/Switch:

Indicate whether data plane destined to the specific group address from the source IPv4/IPv6

address could be handled by chip or not.

4.11 IPMC

The “IPMC” menu includes IGMP Snooping and MLD Snooping sub menu. Select the appropriate menu to set up detailed
configurations.

4.11.1 IGMP Snooping

The Internet Group Management Protocol (IGMP) is a communications protocol used to manage the membership of
Internet Protocol multicast groups. IGMP is used by IP hosts and adjacent multicast routers to establish multicast group
memberships. It can be used more efficiently when supporting activities, such as, online streaming video and gaming.

IGMP Snooping is the process of listening to IGMP traffic. IGMP snooping, as implied by the name, is a feature that allows
the switch to “listen in” on the IGMP conversation between hosts and routers by processing the layer 3 packets that
IGMP packets sent in a multicast network.

When IGMP snooping is enabled in a switch, it analyses all the IGMP packets between hosts connected to the switch and
multicast routers in the network. When a switch receives an IGMP report for a given multicast group from a host, the
switch adds the host's port number to the multicast list for that group. When the switch hears an IGMP Leave, it removes
the host's port from the table entry.

IGMP snooping can reduce multicast traffic from streaming and other bandwidth intensive IP applications more
effectively. A switch using IGMP snooping will only forward multicast traffic to the hosts in that traffic. This reduction of
multicast traffic reduces the packet processing at the switch (at the cost of needing additional memory to handle the
multicast tables) and also decreases the workload at the end hosts since their network cards (or operating system) will
not receive and filter all the multicast traffic generated in the network.

«
...
87
88
89
90
91
...
»

Содержание GSW-3208M2


















































































































































Отзывы:

Нет отзывов

Похожие инструкции для GSW-3208M2

RackSwitch G8264

Бренд: IBM Страницы: 20

Flex System FC3171

Бренд: IBM Страницы: 64

Бренд: N-Tron Страницы: 2

DMS-1250 Series

Бренд: D-Link Страницы: 38

Бренд: National Instruments Страницы: 23

Бренд: Holland Страницы: 4

Бренд: GBC Страницы: 2

Бренд: Comprehensive Страницы: 12

R-TEC Automation RTMWSR15C

Бренд: Rowley Страницы: 10

Бренд: Zektor Страницы: 30

Бренд: AMBIENTECH Страницы: 4

ePowerSwitch 8XM Master

Бренд: ADDER Страницы: 2

Бренд: TRENDnet Страницы: 2

Бренд: Opencockpits Страницы: 30

Бренд: Edge-Core Страницы: 2

Бренд: IOGear Страницы: 12

Бренд: N-Tron Страницы: 169

Бренд: Kramer Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды