CTC Union GSW-3208M2 Скачать руководство пользователя | Manualshive

Страница: 72 / 145

background image

72

Chapter 4

Web Configuration & Operation

4.6.2.7.3 RADIUS Details

RADIUS Authentication Statistics for Server

Access Accepts:

The number of RADIUS Access-Accept packets (valid or invalid) received from the server.

Access Rejects:

The number of RADIUS Access-Reject packets (valid or invalid) received from the server.

Access Challenges:

The number of RADIUS Access-Challenge packets (valid or invalid) received from the server.

Malformed Access Responses:

The number of malformed RADIUS Access-Response packets received from the server.

Malformed packets include packets with an invalid length. Bad authenticators or Message Authenticator attributes or
unknown types are not included as malformed access responses.

Bad Authenticators:

The number of RADIUS Access-Response packets containing invalid authenticators or Message

Authenticator attributes received from the server.

Unknown Types:

The number of RADIUS packets that were received with unknown types from the server on the

authentication port and dropped.

Packets Dropped:

The number of RADIUS packets that were received from the server on the authentication port and

dropped for some other reason.

Access Requests:

The number of RADIUS Access-Request packets sent to the server. This does not include

retransmissions.

Access Retransmissions:

The number of RADIUS Access-Request packets retransmitted to the RADIUS authentication

server.

Pending Requests:

The number of RADIUS Access-Request packets destined for the server that have not yet timed out or

received a response. This variable is incremented when an Access-Request is sent and decremented due to receipt of an
Access-Accept, Access-Reject, Access-Challenge, timeout, or retransmission.

Timeouts:

The number of authentication timeouts to the server. After a timeout, the client may retry to the same server,

send to a different server, or give up. A retry to the same server is counted as a retransmit as well as a timeout. A send to
a different server is counted as a Request as well as a timeout.

IP Address:

IP address and UDP port for the authentication server in question.

State:

Shows the state of the server. It takes one of the following values:

«
...
70
71
72
73
74
...
»

Содержание GSW-3208M2


















































































































































Отзывы:

Нет отзывов

Похожие инструкции для GSW-3208M2

Бренд: CAME Страницы: 2

Бренд: Dataprobe Страницы: 3

Бренд: Panasonic Страницы: 206

Бренд: Yeastar Technology Страницы: 11

Бренд: Black Box Страницы: 26

Edge RTM-ATCA-F140

Бренд: Penguin Страницы: 2

Бренд: NTI Страницы: 15

Бренд: Unipoe Страницы: 41

Бренд: Comm-Tec Страницы: 48

Бренд: Lightwave Страницы: 53

Бренд: Black Box Страницы: 20

Бренд: Dahua Страницы: 12

Бренд: Phonic Страницы: 16

JTECH-4K88-EX-RX

Бренд: J-TECH Страницы: 40

Бренд: Taiden Страницы: 4

DG-GS4900SE Series

Бренд: Digisol Страницы: 23

S5700-24F-8G-4TF

Бренд: Hored Страницы: 28

Бренд: Imagine Страницы: 93

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды