CTC Union FMUX03/V35, Инструкция по установке и эксплуатации

Страница: 14 / 27

FMUX03/V35
14
Chapter 4 - Operating and Setup Instructions
FMUX03/V35 provides easy to use LCD control for easy configuration, maintenance,
and testing. Button functions are as follows:
Menu select
▲
Go back to the upper level of the menu
▼
“Enter” key to go to a sub-menu
When logged in to the VT-100 terminal, the screen will show two sets of “Alarm
Report” at the button of the screen, one for local alarm and the other for remote alarm:
SYS: System normal / System failure
O/E1 and O/E2: Status of O/E modules
V.35: Status of V.35 connector port
Under normal operation, the LCD display will show that the optical module in
use as “Working,” and the backup optical module as “Standby.”
If a loss of signal is detected, the LOS LED will light up. In addition, the LCD
display will also show that there is a “Loss of signal” in optical module.
4-1 Profile
a. Download Default
b. Download Userdefault
c. Save
Userdefined
d. Password Modify
e. Logout
Download and Save Profiles:
Download Default: Download factory default settings
The system will reset itself before downloading the factory default settings.
Download Userdefault: Download user defined values
The system will reset itself before downloading the user-defined settings.
Modify Password:
To prevent unauthorized login, user must enter a set of password to login to the
system.
The password for FMUX03/V35 is a combination of the buttons below, for left to
right: