CTC Union ET100A, Руководство пользователя

Страница: 7 / 34

ET100A LAN-WAN Bridge
7
Overview
The
ET100A
Network Bridge is a high performance, remote,
self ‐ learning Ethernet bridge. Its compact size and low cost make it ideal
for cost ‐ sensitive bridging applications, or as a LAN extender or segmenter
over bit stream type infrastructures. Several selectable synchronous data
interfaces, including V.35, RS ‐ 530, RS ‐ 449, X.21, and RS ‐ 232, make this
Ethernet Bridge's connection between 10Base ‐ T and 100Base ‐ TX LAN and
various SYNC data port interfaces convenient.
Features
„
Supports raw HDLC, Cisco® HDLC, and PPP encapsulation
„
10BASE-T/100BASE-TX, Full Duplex or Half Duplex
„
HP Auto-MDI/MDIX detects and corrects crossed cable
„
Automatic address learning, aging and deletion after 5 minutes
„
Forwarding and filtering rate at wire speed with through put latency of
1 frame.
„
Auto padding of undersized packets to meet the minimum Ethernet
packet size requirement
„
1763 packet buffer
„
Ethernet interface has automatic Twisted Pair polarity correction
„
Built-in nx64K / nx56K timing clock generator for WAN link for speeds
up to 10mbps
„
256 MAC Table
„
Ethernet flow control per IEEE802.3x