CTC Union EOC-20, Руководство пользователя

Страница: 24 / 30

10.3. Connecting an EoCNA device to the Coax network
10.3.1 Cable video signal
If there is a cable video CATV signal in the network, both the TV and EoCNA devices should be
connected to the TV connector of the wall outlet. In this case a simple installation should be used as
shown in Figure 2. The diplexer routes the 12-28/44MHz band to the EoCNA AFE and routes the
50MHz and higher band to the TV .
Figure 2 EOC HFC plus EOC Network
10.4. Installation Guide Lines
10.4.1 Placement of Master
In home networking applications all nodes on the network must be able to communicate with each
other. In this implementation the Master device can be placed anywhere in the network. Typically
the Master is located at the RG, ONT, etc.