CTC Union EcoZenith 510, Инструкция по установке и обслуживанию

Страница: 6 / 20

6 CTC EcoZenith C 530 l 510
For the property owner
Important to remember!
Pay special attention to the following points on delivery and during
installation:
• Transport and store CTC EcoZenith C 530 and 510 upright. A unit can
be laid
on its back for a short time if necessary.
• Remove the packaging, and, before installation, check that the unit has
not been damaged during transportation. Notify the forwarding agent if
any such damage
has occurred.
• Install CTC EcoZenith C 530 or 510 on a solid foundation, preferably a
concrete base. If it is to stand on a soft carpet, plates must be placed
under the feet.
• Remember to leave a service space of minimum 1 m in front of the
unit. Space is also required around it for fitting the insulation and plastic
top. See section Transport, unpacking and installation in the section for
the installation technician.
CTC EcoZenith C 530 and 510 should also not be placed below floor
level.
Safety Instructions
Comply with the following safety instructions when handling, installing and
using
CTC EcoZenith C 530 and 510:
• Do not rinse off CTC EcoZenith C 530 and 510 with water.
• When handling the unit with a lifting eye or similar, ensure that the lifting
equipment, eye bolts and other parts are not damaged. Never stand
under a hoisted unit.
• Never jeopardize safety by removing, for example, bolted covers or
hoods.
• Never jeopardize safety by deactivating safety equipment.
• Work on the unit may only be carried out by authorised personnel.
• Safety valve check:
• Check the safety valves for the boiler/system and hot tap water
regularly.
See section Operation and maintenance.