CTC Union 588347301, Руководство по установке и обслуживанию

Страница: 7 / 28

Checklist
The checklist must always be completed by the installation engineer
• In the event of servicing, this document may need to be provided
• Installation must always be carried out according to the Installation and Maintenance Instructions
• Installation must always be carried out according to professional standards
Following installation, the unit must be inspected and functional checks performed as
indicated below:
Pipe installation
†
The system filled, positioned and adjusted according to professional standards and the instructions
†
Product placed to facilitate service
†
Pumps, valves, etc. sized according to required flows
†
System tested for leakage and correctly sealed
†
Bleeding performed (subsequent bleeding may be necessary)
†
Safety equipment fitted and inspected/functionally tested
†
Overflow pipes from safety valves routed to floor drain
†
Tank system flushed with cold freshwater as per these instructions
†
Secondary visit to inspect seals and check that system bleeding performed
Electrical installation
†
Safety switch installed
†
Cable routing correct according to applicable regulations
†
Correct fuse installed (group fuse)
Information provide to customer (according to the specific installation)
†
Start-up with customer/installer
†
Review of heating unit connected to the tank system
†
Installation and Maintenance Manual given to the customer
†
Check and filling, heating circuit
†
Fine-tuning information, valve settings, etc.
†
Information about operational disruptions and appropriate measures
†
DHW mixing valve placement and settings
†
Safety valve function test
†
Warranties and insurance
†
Installation verification/warranty filled in and posted
†
Information and procedures for reporting faults
______________________________________ ______________________________________
Date/Customer Date/Installer
!
If these instructions are not followed when installing, operating and maintaining
the system, Enertech’s obligation under the applicable warranty terms is not bind-
ing