CTB F4420125 Скачать руководство пользователя страница 2

August 2018 
© CTB, Inc. All Rights Reserved. 

 

 PigTek Limited Warranty & Disclaimer of Liability                          

 

 

 

LIMITED WARRANTY (“Warranty”) 

PigTek  Americas,  a  division  of  CTB,  Inc.  warrants  new 

Products

  manufactured  purchased  from  PigTek  to  be  free  from  defects  in 

material or workmanship under normal usage and conditions, for One (1) year from the date of  installation by the original purchaser 
PigTek provides for an extension of the aforementioned Warranty period (“Extended Warranty Period”) with respect to certain Product 
parts (“Component Part”) as set forth in the table below.  If such a defect is determined by PigTek to exist within the warranty period, 
the exclusive remedy will be to repair or replace the Product or Component Part at the sole discretion of PigTek, at no charge to the 
Purchaser.  Labor costs associated with the removal and/or installation of replacement and/or repaired Product or Component Part, as 
well as freight costs, are not covered by this Limited Warranty.  This Warranty is not transferable, and applies only to the Purchaser. 

 

Component Part  

Extended Warranty 

Period  

Fiberglass Housings 

Lifetime 

Cast Aluminum Blades 

Lifetime 

Rotating Centerless Augers (except where used in applications involving high moisture feed 
stuffs exceeding 17%) 

10 Years 

Steel Auger Tubes 

10 Years 

Stainless Steel Feeders 

5 Years 

Hopper Bins 

5 Years 

Fan Plastic Shutter and Polyethylene Cones 

3 Year 

Motors and Bearings 

2 Years 

Chore-Time Control 

2 Years 

 

THIS  WARRANTY  CONSTITUTES  CHORE-TIME’S  ENTIRE  AND  SOLE  WARRANTY  AND  PIGTEK  EXPRESSLY 
DISCLAIMS ANY AND ALL OTHER WARRANTIES, INCLUDING, BUT NOT LIMITED TO, EXPRESS AND IMPLIED 
WARRANTIES,  INCLUDING,  WITHOUT  LIMITATION,  WARRANTIES  AS  TO  MERCHANTABILITY  OR  FITNESS 
FOR  PARTICULAR  PURPOSES.    PigTek  shall  not  be  liable  for  any  direct,  indirect,  incidental,  consequential  or  special 
damages  which  any  Purchaser  may  suffer  or  claim  to  suffer  as  a  result  of  any  defect  in  the  Product  or  Component  Part.  
Consequential or Special Damages as used herein include, but are not limited to, lost or damaged products or goods, costs of 
transportation, lost sales, lost orders, lost income, increased overhead, labor and incidental costs, and operational inefficiencies.  

Some jurisdictions prohibit limitations on implied warranties and/or the exclusion or limitation of such damages, so these limitations 
and exclusions may not apply to you. This Limited Warranty gives the 

Purchaser specific

 legal rights. You may also have other rights 

based upon your specific jurisdiction.

 

 
The following circumstances may render this Warranty void: 

 

Modifications made to the Product or Component Part not specifically delineated in the Product or Component Part manual. 

 

Product or Component Part not installed, tested, and/or operated in accordance with the instructions published by the PigTek. 

 

All components of the Product are not original equipment supplied by PigTek. 

 

Product was not purchased from a PigTek authorized distributor or certified representative. 

 

Product was not installed by a PigTek authorized distributor or representative, or a licensed electrician. 

 

Product  or  Component  Part  experienced  malfunction  or  failure  resulting  from  misuse,  abuse,  mismanagement,  negligence, 
alteration, accident, or lack of proper maintenance, or from lightning strikes, electrical power surges or interruption of electricity. 

 

Product or Component Part experienced corrosion, material deterioration and/or equipment malfunction caused by or consistent 
with the application of chemicals, minerals, sediments or other foreign elements. 

 

Product or Component Part was used for any purpose other than for the care of poultry and livestock. 

 
This Limited Warranty may only be modified in writing by an officer of PigTek.  PigTek will have no obligation or responsibility for 
any representations or warranties made by or on behalf of any distributor, dealer, agent or certified representative.  

 

DISCLAIMER OF LIABILITY 

Compliance with federal, state and local rules which apply to the location, installation and use of the Product are the responsibility of 
the Purchaser.  Chore-Time will not be liable for any damages which result from non-compliance with such rules.  

 

PigTek Americas, A division of CTB, Inc. 

PO Box 2000, Milford, Indiana 46542-2000 USA 

www.choretime.com 

Содержание F4420125


















Отзывы: