•
If so desired, press the
REPEAT
button on the remote control to set a new
repeat mode of your choice, different from the settings in the SETUP menu.
–REPEAT ALL: repeats all the files in the library sequentially
–REPEAT ONE: repeats the highlighted music only
–REPEAT OFF: music stops when the end of the library is reached.
•
Press the
M-SLIDE
button on the remote control to initiate the Music
Slideshow. Photos must be present in order to have slideshow; otherwise, it
will only be music playback.
•
Press the
VOL
button on the remote control to change the volume of the
music.
•
Press the
MUTE
button on the remote control to mute the music.
•
Press the
HOME
button on the remote control to jump to the main level of the
DMP software application.
•
Press the
DISPLAY
button on the remote control to display a Graphics
Equalizer to accompany the music playback. Pressing
DISPLAY
again will hide it.
•
Press the
PHOTO
button on the remote control to jump to the Photo
Thumbnails Screen. If no photo file is present, no action takes place.
•
Press the
VIDEO
button on the remote control to jump to the Video
Thumbnails Screen. If no video file is present, no action takes place.
• Press the FILE button on the remote control to jump to the File Management
Screen.
Digital Video Playback
The digital video playback is initiated in three ways: (1) only videos are present
in the device/card, (2) the Video option was selected from the Multiple Contents in
Card screen or (3) the Video shortcut button on the remote control was pressed.
In the digital video playback mode, the Video Thumbnails Screen will appear.
All the videos found in the device/card will be displayed in continuous pages of
video thumbnails.
If the device/card has more than one folder and you desire to view the videos
by folder, go to chapter six (6) “File Library Management” for how to access
individual folders.
Use the navigation buttons to move through the thumbnails in the thumbnail
page, and use the I
<<
and
>>
I buttons to jump to the previous or next page of
thumbnails.
If the Auto Start option in the SETUP menu is set to ON, the playback of all
files at Power-Up would be in effect and the Video Thumbnails Screen will not be
visible.
Video Thumbnails Screen
•
Press the
ENTER
button on the remote control to playback the highlighted
thumbnail in full-screen. Once in full-screen, pressing the
ENTER
button again will
return to the Video Thumbnails Screen.
•
Press the
PLAY/PAUSE
button on the remote control to start the Video
