2.Attaching Foam Pad to Tablet Holder :
3. Inserting Tablet to Holder :
4. Adjustability
A
B
3A. Press quick release button on side of tablet
holder (A) to release the adjustable end.
3B. Insert tablet corner against the spring arm. Push adjustable arm
down against opposite corner (A). Be sure it is as snug as possible.
1.Twist the screw knobs
counter clock-wise to loosen
joints
2. Adjust the arm to desired position
then twist the screw knob clock-wise
until securely tightened.
2A. Select the appropiate foam pad (B) according to the thickness of your tablet (or tablet in its case), then
press adhesive side into center of the tablet holder.
1mm
5mm
10mm
Please be sure to fasten all the screws were
tightened securely while using the stand.
Not for use while driving.
Max loading :1KG
Do not install CTA’s products over an air bag
cover or within the air bag deployment zone.
CTA Digital, Inc. assumes no respons of liability
for injury or death as a result of car crashes and
/ or air bag deployment. CTA is not responsible
for any damages caused to your vehicle, your
device, or yourself due to the installation or use
of this product.
Caution
Safety Precautions
- Use this table to determine the appropiate
foam pad (B) to use with your tablet.
Note: sizes refer to total tablet size with or
without a case
Tablet Thickness:
Foam Pad
Thickness:
1mm
0.67-1.06in / 17-27mm
0.51- 0.91in / 13-23mm
0.31- 0.71in / 8-18mm
5mm
10mm
A
**Tablet for illustration
only and not included
A
A