Vehicle Dash Mount w/ Custom Flex Arms
AUT-VDMC
INSTALLATION - MANUAL
INSTALLATION:
1.Installing the Mount to Vehicle :
1A. Drill holes on the surface as shown above
with power drill tool (not provided).
1B. Place vehicle dash mount (B) aligning the holes
drilled on surface and then screw in the provided x4
screws (C) through the base with a screw driver (not
provided) until securely tightened.
A
A
CONTENTS:
x4
Screws
C
x3
Foam
Pads
B
1mm
5mm
10mm
x1
Vehicle
Dash Mount
A
Drilling into the dash, wall, or roof will be a permanent installation and may cause damage if not
installed properly. Use caution and consult a mobile install professional to avoid drilling into the gas
tank,electrical system or other highly sensitive vehicle components.
