CSR BlueCore Casira, Руководство пользователя

Страница: 22 / 33

BlueCore Utilities in BlueSuite
bc01-an-100Pd
© Copyright Cambridge Silicon Radio Limited 2001-2004
This material is subject to CSR’s non-disclosure agreement.
Page 22 of 33
_äìÉ`çêÉ
™
Casira User
Guide
Examples
To establish an ACL link:
1. Connect both Casira units to a PC (via their host interface).
2. Power up each Casira unit.
3. For each Casira, open a BlueChat2 utility and select the appropriate protocol and baud rates. The baud
rate must be the same as the current setting of the PSKEY_UART_BAUD_RATE in the Persistent
Store. Casira modules are supplied set to SP with a baud rate of 115.200kbps.
4. BlueChat2 will find the local device and display its Bluetooth Device Address in the Device On: field.
5. The HCI window displays the HCI traffic used to configure the device.
6. Select the role of the device. Put one device into Master mode and one into Slave mode.
7. Selecting the Master will allow the
Inquire
button to be used.
8. Selecting the Slave will put the device into Inquiry Scan mode to allow the Master to connect to it.
9. On the Master’s BlueChat window, click the
Inquire
button and the Master will perform an inquiry to find
any slave devices in the area.
10. After the inquiry is finished (which should take about 20 seconds), the Master will show the addresses of
the Bluetooth devices it found during the inquiry. You can cancel the Inquiry at any time by clicking
Cancel Inquiry
(any devices found before cancellation will display).
11. Select the address of the Bluetooth device you want to connect to in the Bluetooth Address Box.
12. To connect, click on
Connect
.
13. After connecting, select
Data
in the Xfer type field.
14. You now should have a connection between the two devices. You can send messages through the chat
window or transfer files.
To Establish a SCO link:
1. Using PSTools in developer mode, edit the MAP_SCO_OVER_PCM PS Key (427
PSKEY_HOSTIO_MAP_SCO_PCM) and set it to true on both Casiras.
2. Reset Casira.
3. Plug in headsets to Casiras.
4. Follow steps 1 through 8 as for an ACL link above.
5. Select audio in the Xfer field.
6. You now should be able communicate with headsets over an audio SCO link to the other Casira.